diff -u -p linux/drivers/net/irda.d6/act200l-sir.c linux/drivers/net/irda/act200l-sir.c --- linux/drivers/net/irda.d6/act200l-sir.c Wed Dec 31 16:00:00 1969 +++ linux/drivers/net/irda/act200l-sir.c Thu Jan 22 16:43:35 2004 @@ -0,0 +1,258 @@ +/********************************************************************* + * + * Filename: act200l.c + * Version: 0.8 + * Description: Implementation for the ACTiSYS ACT-IR200L dongle + * Status: Experimental. + * Author: SHIMIZU Takuya + * Created at: Fri Aug 3 17:35:42 2001 + * Modified at: Fri Aug 17 10:22:40 2001 + * Modified by: SHIMIZU Takuya + * + * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + ********************************************************************/ + +#include +#include +#include + +#include + +#include "sir-dev.h" + +static int act200l_reset(struct sir_dev *dev); +static int act200l_open(struct sir_dev *dev); +static int act200l_close(struct sir_dev *dev); +static int act200l_change_speed(struct sir_dev *dev, unsigned speed); + +/* Regsiter 0: Control register #1 */ +#define ACT200L_REG0 0x00 +#define ACT200L_TXEN 0x01 /* Enable transmitter */ +#define ACT200L_RXEN 0x02 /* Enable receiver */ + +/* Register 1: Control register #2 */ +#define ACT200L_REG1 0x10 +#define ACT200L_LODB 0x01 /* Load new baud rate count value */ +#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */ + +/* Register 4: Output Power register */ +#define ACT200L_REG4 0x40 +#define ACT200L_OP0 0x01 /* Enable LED1C output */ +#define ACT200L_OP1 0x02 /* Enable LED2C output */ +#define ACT200L_BLKR 0x04 + +/* Register 5: Receive Mode register */ +#define ACT200L_REG5 0x50 +#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */ + +/* Register 6: Receive Sensitivity register #1 */ +#define ACT200L_REG6 0x60 +#define ACT200L_RS0 0x01 /* receive threshold bit 0 */ +#define ACT200L_RS1 0x02 /* receive threshold bit 1 */ + +/* Register 7: Receive Sensitivity register #2 */ +#define ACT200L_REG7 0x70 +#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */ + +/* Register 8,9: Baud Rate Dvider register #1,#2 */ +#define ACT200L_REG8 0x80 +#define ACT200L_REG9 0x90 + +#define ACT200L_2400 0x5f +#define ACT200L_9600 0x17 +#define ACT200L_19200 0x0b +#define ACT200L_38400 0x05 +#define ACT200L_57600 0x03 +#define ACT200L_115200 0x01 + +/* Register 13: Control register #3 */ +#define ACT200L_REG13 0xd0 +#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */ + +/* Register 15: Status register */ +#define ACT200L_REG15 0xf0 + +/* Register 21: Control register #4 */ +#define ACT200L_REG21 0x50 +#define ACT200L_EXCK 0x02 /* Disable clock output driver */ +#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */ + +static struct dongle_driver act200l = { + .owner = THIS_MODULE, + .driver_name = "ACTiSYS ACT-IR200L", + .type = IRDA_ACT200L_DONGLE, + .open = act200l_open, + .close = act200l_close, + .reset = act200l_reset, + .set_speed = act200l_change_speed, +}; + +int __init act200l_init(void) +{ + return irda_register_dongle(&act200l); +} + +void __exit act200l_cleanup(void) +{ + irda_unregister_dongle(&act200l); +} + +static int act200l_open(struct sir_dev *dev) +{ + struct qos_info *qos = &dev->qos; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + + /* Power on the dongle */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + /* Set the speeds we can accept */ + qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; + qos->min_turn_time.bits = 0x03; + irda_qos_bits_to_value(qos); + + /* irda thread waits 50 msec for power settling */ + + return 0; +} + +static int act200l_close(struct sir_dev *dev) +{ + IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + + /* Power off the dongle */ + sirdev_set_dtr_rts(dev, FALSE, FALSE); + + return 0; +} + +/* + * Function act200l_change_speed (dev, speed) + * + * Set the speed for the ACTiSYS ACT-IR200L type dongle. + * + */ +static int act200l_change_speed(struct sir_dev *dev, unsigned speed) +{ + u8 control[3]; + int ret = 0; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + + /* Clear DTR and set RTS to enter command mode */ + sirdev_set_dtr_rts(dev, FALSE, TRUE); + + switch (speed) { + default: + ret = -EINVAL; + /* fall through */ + case 9600: + control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f); + control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f); + break; + case 19200: + control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f); + control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f); + break; + case 38400: + control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f); + control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f); + break; + case 57600: + control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f); + control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f); + break; + case 115200: + control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f); + control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f); + break; + } + control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE; + + /* Write control bytes */ + sirdev_raw_write(dev, control, 3); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(MSECS_TO_JIFFIES(5)); + + /* Go back to normal mode */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + dev->speed = speed; + return ret; +} + +/* + * Function act200l_reset (driver) + * + * Reset the ACTiSYS ACT-IR200L type dongle. + */ + +#define ACT200L_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET+1) +#define ACT200L_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET+2) + +static int act200l_reset(struct sir_dev *dev) +{ + unsigned state = dev->fsm.substate; + unsigned delay = 0; + u8 control[9] = { + ACT200L_REG15, + ACT200L_REG13 | ACT200L_SHDW, + ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL, + ACT200L_REG13, + ACT200L_REG7 | ACT200L_ENPOS, + ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1, + ACT200L_REG5 | ACT200L_RWIDL, + ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR, + ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN + }; + int ret = 0; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + + switch (state) { + case SIRDEV_STATE_DONGLE_RESET: + /* Reset the dongle : set RTS low for 25 ms */ + sirdev_set_dtr_rts(dev, TRUE, FALSE); + state = ACT200L_STATE_WAIT1_RESET; + delay = 50; + break; + + case ACT200L_STATE_WAIT1_RESET: + /* Clear DTR and set RTS to enter command mode */ + sirdev_set_dtr_rts(dev, FALSE, TRUE); + + udelay(25); /* better wait for some short while */ + + /* Write control bytes */ + sirdev_raw_write(dev, control, sizeof(control)); + state = ACT200L_STATE_WAIT2_RESET; + delay = 15; + break; + + case ACT200L_STATE_WAIT2_RESET: + /* Go back to normal mode */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + dev->speed = 9600; + break; + default: + ERROR("%s(), unknown state %d\n", __FUNCTION__, state); + ret = -1; + break; + } + dev->fsm.substate = state; + return (delay > 0) ? delay : ret; +} + +MODULE_AUTHOR("SHIMIZU Takuya "); +MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */ + +module_init(act200l_init); +module_exit(act200l_cleanup);